Descriptions:
* Built-in 240W high-efficiency digital power amplifier, integrated 2 power A + B independent dual-speaker loop zone output, each zone has independent LED indicator, independent output control buttons and volume adjustment.
*4 audio balanced input interfaces for playing any audio source in the zones
*Local emergency PTT microphone input and emergency voice can be configured by PC software to be played in specific zone.
*Automatically detect the working status of each zone loop (fault, normal)
*The 4-channel trigger input/output port can trigger the emergency voice preset by the PC software to the specified zone or the corresponding external power source to the corresponding event warning.
*Support third-party emergency audio input (user-defined emergency audio source)
*Integrated independent EVAC/ALERT voice information player.
*The remote paging microphone / fireman microphone online interface can connect with remote paging microphone and fireman
microphone, each paging station connection uses standard RJ-45 network port and standard CAT-5 network cable, voice transmission uses balanced transmission mode for long-distance transmission.
*Controller online interface can be connected to the slave unit, it uses standard RJ-45 network port and standard CAT-5 network cable.
*communication interface, supports visual interface operation based on Window platform, and the system status can be automatically synchronized.
*Support DC24V battery backup power supply.
*With power amplifier monitoring function.
*Support PTT recording function, no external equipment required.
*System fault, dry contact output for emergency status, dry contact input for emergency status reset
*The zone output has three-wire and four-wire over-ridding adjustment functions.
*With IP address reset function and impedance calibration function.
*The master-slave unit is integrated, and the device can be used as a controller or a slave unit by setting code address, and the maximum of 19 slaves can be simultaneously online.
*The system can extend the number of the zones by slave units, it support 40 zones maximum.
Specifications:
Model | VA-2240WM |
Voltage | ~220V±20%, 50/60Hz |
Fuse specifications | 2A slow breaking type |
MIC input |
|
Sensitivity | ±2.5mV |
Frequency response | 200Hz~10KHz |
Input impedance | 1KΩ |
Signal to noise ratio | >65dB |
Balanced line input |
|
Sensitivity | ±385mV |
Frequency response | 80Hz~16KHz |
Input impedance | 10KΩ |
Signal to noise ratio | >70dB |
RS485 interface | Slave RS485 interface |
Supports the highest baud rate of 38400bps |
Support up to 19 expansion machines |
CAN interface | Remote MIC console CAN interface |
Baud rate 50Kbps |
Supports up to 28 remote Microphone and 4 |
Fireman Remote Microphone |
Trigger mode | short circuit trigger and level trigger |
Output mode | relay short circuit output |
Dimension(mm) | 570×440×186mm |
Net weight | 17.6Kg |
Installation | Wall Mounted |
Color | Fireman's Red |
Operating temperature | +5℃~ +40℃ |
Storage temperature | -20℃~ +70℃ |
Relative temperature | <95% |
